| Quantity: | |
|---|---|
Continuous all-in-one machine processing pineapple surface, axe-cutting surface and bush hammered surfaceis anupgraded version of the ordinary pineapple surface machine. The machine has 4 sets of working heads, which can producefinished products in one go. The distribution box is independently installed and operated. The frequency converter adjuststhe speed of the upper board and the cutting board. When replacing the cutting head, a cylinder is used to lift the mainmachine at a 30 degree angle, saving time and effort in loading and unloading the cutting head. The size of the pineapplesurface can be adjusted by the frequency converter, and the distance of the eccentric wheelhole can be adjusted. Thewalking speed of the track can be fast or slow, In order to produce good products, the two sides of the machine head aredesigned with adjustable plate bafles. The use of the whole machine greatly saves manpower and electricity, and thepower consumption is reduced by about 70% compared to similar products on the market. This machine is equipped witha power of 5s kilowatts. Whenworking. adjust the frequency converter speed to around 15kw for pineapple surface andaxe cutting surface. The working pressu reranges from3.SMpa to 6Mpa. The pineapple surface processing width is 870 mmand the processing height is 30mm; Axe cutting surface processing width of 1000mm, processing height of 300 mmprocessing speed of 2-4/m,Bush hammered surface processing width of 900 millimeters, processing height of 300 mm.processing speed of 2-4 /m.
